REACHReady

Information required for pre-registration

The information needed for pre-registration is as follows :

• the name of the substance as specified in section 2 of Annex VI, including its EINECS and CAS number or, if not available, any other identity codes;
• the registrant company's name, address and contact person and, where appropriate, the name and address of the person acting as a representative in accordance with Article 4 as specified in section 1 of Annex VI;
• the envisaged deadline for the registration/tonnage band;
• the name(s) of similar substance(s) as specified in section 2 of Annex VI, including their EINECS and CAS number or, if not available, any other identity codes, for which the available information is relevant for the application of sections 1.3 and 1.5 of Annex XI.

Back to The Eight-step Registration Process

Information requirements for registration

The information requirement for full registration will depend on the quantity imported or manufactured.  The basic requirements are set out in REACH Article 10, which cross-refers to the Annexes.

In order to complete the registration, the registrant will have to provide information, to a central European Chemicals Agency and depending on the tonnage, the usage and substance type; the information that may be required includes:

• identity of the registrant and the substance
• known hazards
• gaps in information, which needs to be filled
• manufacture and uses
• classification and labelling
• risk management for identified uses
• exposures arising from use
• a chemical safety report.(This is not a comprehensive list.)

Back to The Eight-step Registration Process

Submission Deadline

The "final" deadlines for submission of a full registration for pre-registered substances are set out in Article 23 of REACH.  The closing date for registration depends on tonnage band and the hazard classification of the substance.  The first registration deadline, in late 2010, is for the substances of most concern or very high tonnages; the final deadline is in 2018, 11 years after REACH  entered into force, for substances manufactured or imported in quantities below 100 tonnes per year

Back to The Eight-step Registration Process

Substance Information Exchange Forum Operation

Pre-registration results in the identification of other potential registrants of the same substance.  SIEF participation is obligatory with the aim of sharing data to avoid unnecessary animal testing.  The SIEF also provides a forum to agree and carry out further investigative work to fill information gaps and agree on classification and labelling.  Work involving tests on vertebrate animals should strictly follow the procedures intended to minimise such testing, including the use of "read-across".

REACH recognises that data has value and will need to be paid for a fair market rate.  Procedures and guidance is given in ECHA's Guidance on Data Sharing to help SIEFs ensure transparency and equality in data sharing.

Back to The Eight-step Registration Process

Registration preparation in co-operation with your customers

REACH seeks to establish significant improvements in the provision of risk management information down the supply chain.  One step in achieving this aim is requires importers and manufacturers to identify the appropriate precautions to ensure protection of people and the environment.  This work can only be done when the registrant knows the uses of the substance, demanding close working relationships between "actors" in the supply chain.

Back to The Eight-step Registration Process

Joint Registration Submissions

If there is another potential registrant of the same substance then the registration must be submitted jointly unless certain conditions apply.  These include considerations cost, intellectual property, or technical disagreements on information.  Separate submissions must be justified and will attract a higher fee.

Registration with one or more joint registrants will consist of two steps: the submission of common information by an agreed leader and the provision of registrant information by individual firms.

Back to The Eight-step Registration Process